Please see bearing identifier for bearing position.
Bearing will fit the Gen 4 Performance Line CX, Cargo and Speed motors.
Bosch Generation 4 motor BDU4xx.
Brose C, T, S and S-Mag lockring / spider nut tool
This is a castellated tool to fit all Brose chainring spider nut / lockring nuts. The tool has a 3/8″ socket drive for your ratchet or Torque wrench.
Description
| Part Number | E22243-200 |
|---|---|
| Mid-engine type | Brushless Internal Rotor |
| Weight | 3,400 g |
| Dimensions L/H/W | 213mm/128mm/98mm (Casing Width) 213mm/128mm/150mm (Axis width) |
| Nominal Voltage | 36 V |
| Continuous Rated Power | 250 W |
| Torque | 50 Nm |
| Maximum support | 280% |
| Support up to | 25 km/h |
| Walking support up to | 6 km/h |
| Light source | Headlamp 2,4 A/6 V = 14,4 W Rear lamp 0,1 A/6 V = 0,6 W |
| Protection against ingress (seal) | IP56 |
Please note the following important information:
Please contact us to discuss the software application required for your bike manufacturer (Specialized, Fantic, BMW, etc.)
All motors purchased from us have the option to be upgraded for enhanced resistance to water ingress and longevity. Please contact us for further details.
Description
| Part Number | G61340-100 |
|---|---|
| Mid-engine type | Brushless Internal Rotor |
| Weight | 3,400 g |
| Dimensions L/H/W | 213mm/128mm/98mm (Casing Width) 213mm/128mm/150mm (Axis width) |
| Nominal Voltage | 36 V |
| Continuous Rated Power | 250 W |
| Torque | 50 Nm |
| Maximum support | 280% |
| Support up to | 25 km/h |
| Walking support up to | 6 km/h |
| Light source | Headlamp 2,4 A/6 V = 14,4 W Rear lamp 0,1 A/6 V = 0,6 W |
| Protection against ingress (seal) | IP56 |
Please note the following important information:
Please contact us to discuss the software application required for your bike manufacturer (Specialized, Fantic, BMW, etc.)
All motors purchased from us have the option to be upgraded for enhanced resistance to water ingress and longevity. Please contact us for further details.
Description
| Part Number | C97272-100 |
|---|---|
| Mid-engine type | Brushless Internal Rotor |
| Weight | 3,400 g |
| Dimensions L/H/W | 213mm/128mm/98mm (Casing Width) 213mm/128mm/150mm (Axis width) |
| Nominal Voltage | 36 V |
| Continuous Rated Power | 250 W |
| Torque | 90 Nm |
| Maximum support | 380% |
| Support up to | 25 km/h |
| Walking support up to | 6 km/h |
| Light source | Headlamp 2,4 A/6 V = 14,4 W Rear lamp 0,1 A/6 V = 0,6 W |
| Protection against ingress (seal) | IP56 |
Please note the following important information:
Please contact us to discuss the software application required for your bike manufacturer (Specialized, Fantic, BMW, etc.)
All motors purchased from us have the option to be upgraded for enhanced resistance to water ingress and longevity. Please contact us for further details.
Description
| Part Number | G74102-100 |
|---|---|
| Mid-engine type | Brushless Internal Rotor |
| Weight | 3,400 g |
| Dimensions L/H/W | 213mm/128mm/98mm (Casing Width) 213mm/128mm/150mm (Axis width) |
| Nominal Voltage | 36 V |
| Continuous Rated Power | 250 W |
| Torque | 90 Nm |
| Maximum support | 380% |
| Support up to | 25 km/h |
| Walking support up to | 6 km/h |
| Light source | Headlamp 2,4 A/6 V = 14,4 W Rear lamp 0,1 A/6 V = 0,6 W |
| Protection against ingress (seal) | IP56 |
Please note the following important information:
Please contact us to discuss the software application required for your bike manufacturer (Specialized, Fantic, BMW, etc.)
All motors purchased from us have the option to be upgraded for enhanced resistance to water ingress and longevity. Please contact us for further details.
Description
| Part Number | E06855-200 |
|---|---|
| Engine type | Brushless Internal Rotor |
| Weight | 2,900 g |
| Dimensions L/H/W | 198mm/137mm/99mm (Casing Width) 198mm/137mm/150mm (Axis width) |
| Nominal Voltage | 36 V |
| Continuous Rated Power | 250 W |
| Torque | 90 Nm |
| Maximum support | 380% |
| Support up to | 25 km/h |
| Walking support up to | 6 km/h |
| Light source | Headlamp 2 A/12 V = 24 W Rear lamp 0,2 A/12 V = 2,4 W |
| Protection against ingress (seal) | IP56 |
Please note the following important information:
Please contact us to discuss the software application required for your bike manufacturer (Specialized, Fantic, BMW, etc.)
All motors purchased from us have the option to be upgraded for enhanced resistance to water ingress and longevity. Please contact us for further details.
Description
| Part Number | G74105-xxx |
|---|---|
| Engine type | Brushless Internal Rotor |
| Weight | 2,900 g |
| Dimensions L/H/W | 198mm/137mm/99mm (Casing Width) 198mm/137mm/150mm (Axis width) |
| Nominal Voltage | 36 V |
| Continuous Rated Power | 250 W |
| Torque | 90 Nm |
| Maximum support | 380% |
| Support up to | 25 km/h |
| Walking support up to | 6 km/h |
| Light source | Headlamp 2 A/12 V = 24 W Rear lamp 0,2 A/12 V = 2,4 W |
| Protection against ingress (seal) | IP56 |
Please note the following important information:
Please contact us to discuss the software application required for your bike manufacturer (Specialized, Fantic, BMW, etc.)
All motors purchased from us have the option to be upgraded for enhanced resistance to water ingress and longevity. Please contact us for further details.
Description
| Part Number | E01680-200 |
|---|---|
| Engine type | Brushless Internal Rotor |
| Weight | 2,900 g |
| Dimensions L/H/W | 198mm/137mm/99mm (Casing Width) 198mm/137mm/150mm (Axis width) |
| Nominal Voltage | 36 V |
| Continuous Rated Power | 250 W |
| Torque | 90 Nm |
| Maximum support | 380% |
| Support up to | 25 km/h |
| Walking support up to | 6 km/h |
| Light source | Headlight 2A/12V = 24W Rear lamp 0,2A/12V = 2,4W |
| Protection against ingress (seal) | IP56 |
Please note the following important information:
Please contact us to discuss the software application required for your bike manufacturer (Specialized, Fantic, BMW, etc.)
All motors purchased from us have the option to be upgraded for enhanced resistance to water ingress and longevity. Please contact us for further details.
Description
| Part Number | G74104-100 |
|---|---|
| Engine type | Brushless Internal Rotor |
| Weight | 2,900 g |
| Dimensions L/H/W | 198mm/137mm/99mm (Casing Width) 198mm/137mm/150mm (Axis width) |
| Nominal voltage | 36 V |
| Continuous Rated Power | 250 W |
| Torque | 90 Nm |
| Maximum support | 380% |
| Support up to | 25 km/h |
| Walking support up to | 6 km/h |
| Light source | Headlight 2A/12V = 24W Rear lamp 0,2A/12V = 2,4W |
| Protection against ingress (seal) | IP56 |
*6 x E08500 mounting bushes included
Please note the following important information:
Please contact us to discuss the software application required for your bike manufacturer (Specialized, Fantic, BMW, etc.)
All motors purchased from us have the option to be upgraded for enhanced resistance to water ingress and longevity. Please contact us for further details.
Description
| Part Number | C91143-200 |
|---|---|
| Mid-engine type | Brushless Internal Rotor |
| Weight | 3,400 g |
| Dimensions L/H/W | 213mm/128mm/98mm (Casing Width) 213mm/128mm/150mm (Axis width) |
| Nominal Voltage | 36 V |
| Continuous Rated Power | 250 W |
| Torque | 70 Nm |
| Maximum support | 320% |
| Support up to | 25 km/h |
| Walking support up to | 6 km/h |
| Light source | Headlamp 2,4 A/6 V = 14,4 W Rear lamp 0,1 A/6 V = 0,6 W |
| Protection against ingress (seal) | IP56 |
Please note the following important information:
Please contact us to discuss the software application required for your bike manufacturer (Specialized, Fantic, BMW, etc.)
All motors purchased from us have the option to be upgraded for enhanced resistance to water ingress and longevity. Please contact us for further details.
Description
| Part Number | G74099-100 |
|---|---|
| Mid-engine type | Brushless Internal Rotor |
| Weight | 3,400 g |
| Dimensions L/H/W | 213mm/128mm/98mm (Casing Width) 213mm/128mm/150mm (Axis width) |
| Nominal Voltage | 36 V |
| Continuous Rated Power | 250 W |
| Torque | 70 Nm |
| Maximum support | 320% |
| Support up to | 25 km/h |
| Walking support up to | 6 km/h |
| Light source | Headlamp 2,4 A/6 V = 14,4 W Rear lamp 0,1 A/6 V = 0,6 W |
| Protection against ingress (seal) | IP56 |
Please note the following important information:
Please contact us to discuss the software application required for your bike manufacturer (Specialized, Fantic, BMW, etc.)
All motors purchased from us have the option to be upgraded for enhanced resistance to water ingress and longevity. Please contact us for further details.
Description
Blind plug for lighting connector on Brose magnesium motors
Brose S T and S-Mag Crankshaft Pulley Bearing PLB20124, for Brose motor designation ‘S’, ‘T’ and S-Mag.
For Brose S T and S-Mag Crankshaft Needle Roller Bearing PLB20125. We are supplying the original bearing with an additional seal to help protect your motor from water ingress. The seal is fitted before the bearing with the lip facing outwards.
Brose S T and S-Mag Crankshaft Sprag Bearing PLB20127. This is the one way clutch bearing fitted to the crankshaft for freewheel.