Impulse EVO & EVO RS Crankshaft Seal PLI20228, double lip rotary shaft spring seal for excellent sealing of this part.
Impulse EVO Left-hand Crankshaft Bearing PLI20221 with groove cut for O-ring. New O-rings are available from this site.
Impulse EVO Right-hand Crankshaft Bearing PLI20220 with groove cut for O-ring. New O-rings are available from our site.
If you have noise or play from the crankshaft area, chances are that fitting this bearing kit will solve your issue.
This kit does not currently contain the clutch bearings or seals.
If you have noise or play from the crankshaft area, chances are that fitting this bearing kit will solve your issue.
This kit does not currently contain the clutch bearings or seals.
This high quality laser cut gasket will fit Brose aluminium1.2, 1.2e, 1.3, C, S , T and TF motors
MudStop sealing system was designed by VeloLab to ensure better protection for the vulnerable main motor bearing on the Bosch Active and Performance Line / CX motors.
Unlike the Bosch protection seal, MudStop completely covers the entire main motor bearing and outer casing. This stops water and contamination getting past the cover and entering the bearing.
When used with the custom made crankshaft seal, it makes your motor as protected as it always should have been
Full information and instructions can be found here:
If you want to fit the MudStop to your Bosch motor and have the plastic motor covers fitted, you may require the cutting tool to open out the case to accommodate the MudStop bearing seal. See instructions here:
This kit contains all the bearings required to overhaul a Panasonic 36V e-bike motor.
Panasonic 36V Left-hand Crankshaft Bearing PLP00321 with groove cut for O-ring. You can remove and re-use your old O-ring or buy new ones from our site.
Panasonic 36V Motorgear Drive Shaft Bearing PLP00322 with groove cut for O-ring. You can remove and re-use your old O-ring or buy new ones from our site.
Panasonic 36V Right-hand Crankshaft Bearing PLP00320 with groove cut for O-ring. You can remove and re-use your old O-ring or buy new ones from our site.
High quality labyrinth sealed bearing for maximum protection from water and dirt ingress.
Crankshaft needle roller bearing. Fits within the torque sensor/sprocket carrier assembly.
Crankshaft needle roller bearing. Fits within the torque sensor/sprocket carrier assembly.